Color Pre-Wash Snow Foam – Concentrated Car Wash Soap
Color Pre-Wash Snow Foam – Concentrated Car Wash Soap
Discount applied automatically at checkout.
Kan beschikbaarheid voor afhalen niet laden
Bundle & save
Complete your setup
-
This item
Color Pre-Wash Snow Foam – Concentrated Car Wash SoapRed / 100 ml (3.4 oz)
-
Car Wash Bucket Insert – Dirt Trap Filter
-
Premium Microfiber Car Drying Towel – Ultra Absorbent
Car Wash · Pre-Wash
Thick foam. Fewer swirls.
Concentrated pre-wash foam that lifts grit before your contact wash.
- Dilutes 1:5–10 in a foam cannon
- 100 ml or 490 ml bottle
- Red, yellow, blue or green
How to use
1. Dilute. Mix 1 part foam with 5–10 parts water in a foam cannon or foam gun, or 1:40–50 in a hand-pump sprayer.
2. Spray evenly. Cover the whole vehicle surface with an even layer of foam.
3. Let it dwell. Wait a few minutes while the foam softens and loosens the dirt.
4. Rinse bottom up. Rinse with a pressure washer from the bottom up, holding the nozzle 15–20 cm (6–8 in) from the body.
What's in the Box
1 × bottle of pre-wash foam in your chosen color and size
Fit & Compatibility
Made for exterior car surfaces, as the first step before a hand or two-bucket wash.
Not sure it fits your vehicle? Email support@carnovaro.com with your make, model and year before you order, and we will confirm.
Damaged or Defective
If your order arrives damaged or defective, contact us with photos and we will make it right. Full details in our Refund Policy.
Color Pre-Wash Snow Foam – Concentrated Car Wash Soap
Foam First. Then Wash.
A thick, colorful pre-wash that softens dirt and rinses it away before your mitt touches the paint.
- 1:5–10Foam cannon ratio
- 490 mlFull-size bottle
- 4 colorsMix your own shade
Lift the grit before you touch the paint.
Most wash swirls come from dirt being dragged across the paint. A pre-wash foam softens that dirt and rinses it away first, so your mitt meets a cleaner surface.
-
Foam that clings and lifts
Spray it on, give it a few minutes, and the foam softens grime and carries dirt down the panels.
-
Less grit, fewer swirls
Rinsing loose sand away before the contact wash leaves less grit for your mitt to drag across the clear coat.
-
Pick a color, or mix your own
Red, yellow, blue and green foams can be combined for a custom shade, which makes wash day a little more fun.
- 100 ml (3.38 oz) or 490 ml (16.56 oz) Sizes
- Dilute 1:5–10 Foam cannon / foam gun
- Dilute 1:40–50 Hand-pump sprayer
- Red, yellow, blue, green Colors
How to use
Foam first. Then wash.
Pre-wash foam goes on before your mitt ever touches the paint, so loose grit is rinsed away instead of dragged across the finish.
Step 1 · FoamCover the car in foam.
Dilute 1:5–10 in a foam cannon or foam gun, or 1:40–50 in a hand-pump sprayer, and coat the whole car.
- Step 1Mix1:5–10 in a foam cannon or foam gun.
- Step 2SprayWork from the top down, panel by panel.
Step 2 · RinseRinse the grit away.
Give the foam a few minutes to soften the dirt, then rinse from the bottom up. Do not let it dry on the paint.
- Step 1DwellA few minutes, out of direct sun.
- Step 2RinsePressure washer or hose, bottom up.
Step 3 · WashThen wash by hand.
With the loose grit gone, your mitt and car shampoo meet a cleaner surface, so there is less to drag across the clear coat.
- Step 1Two bucketsOne soapy, one to rinse the mitt.
- Step 2Straight linesLess risk of swirl marks.
Step 4 · DryDry and finish.
Dry with a soft microfiber towel for a clean, streak-free finish.
- Step 1Blot or dragA plush towel, light pressure.
- Step 2DoneReady for wax or sealant if you use one.
Use on exterior surfaces. Rinse well and avoid letting foam dry in direct sun.
Wash day
Thick foam. Real results.
In the wash bay or on the driveway, foam first makes every wash easier on the paint.
